IRS2101STRPBF vs IRS21271STRPBF Comparaison
Comparaison détaillée côte à côte de IRS2101STRPBF par Infineon et IRS21271STRPBF par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IRS2101STRPBF | IRS21271STRPBF |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,18 | $1,02 |
| Driver Type | High-Side, Low-Side (Half-Bridge) | — |
| Number of Drivers | 2 | — |
| Nombre de sorties | 2-OUT | — |
| Configuration de sortie | Non-Inverting | — |
| Maximum Offset Voltage | 600 V | — |
| Gate Drive Supply (VCC) | 10 V to 20 V | — |
| Bootstrap Supply (VBS) | 10 V to 20 V | — |
| Source Current (typical) | 0.29 A | 0.29 A |
| Sink Current (typical) | 0.6 A | 0.6 A |
| Logic Input Compatibility | 3.3 V / 5 V / 15 V | CMOS / LSTTL, down to 3.3 V |
| VS Transient Range | -5 V to +600 V (logic operational) | — |
| Undervoltage Lockout | Yes (VCC and VBS) | — |
| Propagation Delay Matching | Matched both channels | — |
| dV/dt Immunity | Yes (latch-immune CMOS) | — |
| Température de fonctionnement | -40C to +125C | — |
| Boîtier | 8-SOIC (SOIC-8) | 8-SOIC (3.90 mm body width) |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TRPBF) | — |
| Technology | HVIC + latch-immune CMOS | — |
| Statut RoHS | Compliant (PBF suffix) | — |
| Fonction | — | High-Side Gate Driver with Current Sense and Fault Output |
| Number of Channels | — | 1 |
| Input Type | — | Non-Inverting |
| Maximum Offset (Bootstrap) Voltage | — | 600 V |
| Gate Drive Voltage Range | — | 9 V to 20 V (automotive VBS range) |
| VCC Supply Voltage | — | 12 V to 20 V |
| Current Sense Comparator | — | Integrated (CS pin with reference) |
| Fault Output | — | Yes (open-drain FAULT pin) |
| Floating Channel Transient Immunity | — | Negative VS transient tolerant, dV/dt immune |
| Plage de température de fonctionnement | — | -40C to +125C |
| Niveau MSL | — | MSL 3 |
| Lead-Free / RoHS | — | Yes (PBF suffix indicates lead-free) |