ISL3172EIUZ vs ISL3172EIUZ-T Comparaison
Comparaison détaillée côte à côte de ISL3172EIUZ par Renesas Electronics et ISL3172EIUZ-T par Renesas Electronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Renesas Electronics
ISL3172EIUZ - 3.3V RS-485/RS-422 Transceiver, 1/8 Unit Load | Renesas
ISL3172EIUZ ✓ ActifRenesas Electronics
ISL3172EIUZ-T - ±15kV ESD, 3.3V RS-485/422 Transceiver | Renesas
ISL3172EIUZ-T ✓ ActifComparaison des spécifications
| Paramètre | ISL3172EIUZ | ISL3172EIUZ-T |
|---|---|---|
| Marque | Renesas Electronics | Renesas Electronics |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,95 | $1,45 |
| Fonction | Transceiver | Transceiver |
| Protocol | RS-422, RS-485 | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Tension d'alimentation | 3 V to 3.6 V | — |
| ESD Protection (Bus pins) | ±15 kV IEC 61000-4-2 contact | — |
| Unit Load | 1/8 unit load | 1/8 (up to 256 nodes per bus) |
| Maximum Nodes on Bus | 256 transceivers | — |
| Bus Current | +125 µA / -100 µA (1/8 load) | — |
| Débit de données | [DATA_NEEDED: Mbps - see ISL3172E family datasheet] | — |
| Fail-Safe | Full fail-safe (open/short/idle) | — |
| Plage de température de fonctionnement | [DATA_NEEDED: -40C to +85C industrial - confirm suffix] | — |
| Boîtier | 8-pin MSOP | 8-MSOP (UZ) |
| Type de montage | Surface Mount | Surface Mount |
| Lead Free / RoHS | Yes (RoHS compliant) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Nombre de broches | 8 | — |
| Data Rate (max) | — | 250 kbps |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Température de fonctionnement | — | -40 °C to +85 °C |
| Bus Pin ESD Protection (HBM) | — | ±15 kV |
| Bus Pin ESD Protection (IEC 61000-4-2 Air) | — | ±15 kV |
| Bus Pin ESD Protection (IEC 61000-4-2 Contact) | — | [DATA_NEEDED: contact-discharge rating] |
| Receiver Common-Mode Range | — | -7 V to +12 V |
| Fail-Safe Receiver | — | Full (logic-high on open/short/idle) |
| Bus Current (driver loaded) | — | +125 µA / -100 µA |
| Quiescent Supply Current | — | 510 µA (typical, no load) |
| Driver Enable | — | Yes (active-high, DE pin) |
| Receiver Enable | — | Yes (active-low, RE pin) |
| Statut RoHS | — | Compliant |
| Lead-Free / Halogen-Free | — | Yes (per Renesas product page) |