ISL81483IB vs ISL8485CB Comparaison

Comparaison détaillée côte à côte de ISL81483IB par Renesas Electronics et ISL8485CB par Renesas Electronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Renesas Electronics
ISL81483IB ISL81483IB - 5V 250kbps RS-485/RS-422 Transceiver | Renesas

ISL81483IB - 5V 250kbps RS-485/RS-422 Transceiver | Renesas

ISL81483IB ✓ Actif
Renesas Electronics
ISL8485CB ISL8485CB - 5V 5Mbps RS-485/RS-422 Transceiver | Renesas

ISL8485CB - 5V 5Mbps RS-485/RS-422 Transceiver | Renesas

ISL8485CB ✓ Actif

Comparaison des spécifications

Paramètre ISL81483IB ISL8485CB
Marque Renesas Electronics Renesas Electronics
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Half-duplex RS-485/RS-422 transceiver RS-485/RS-422 half-duplex transceiver
Tension d'alimentation 5 V 5 V
Maximum Data Rate 250 kbps 5 Mbps
Receiver Unit Load 1/8 unit load —
Maximum Bus Node Count 256 transceivers —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Duplex Mode Half-duplex —
Driver Configuration 1/1 —
Boîtier 8-pin SOIC 8-SOIC
Type de montage Surface mount Surface Mount
Operating Mode Options High-speed or slew-rate-limited —
Power Classification Low power —
Lead-Free Status Lead free —
Statut RoHS Non-compliant Compliant
Application: Process Automation Supported for large-node-count process automation networks —
Application: Remote Meter Reading Supported for remote utility meter reading systems —
Plage de température de fonctionnement [DATA_NEEDED: Operating temperature range] [DATA_NEEDED: operating temperature range]
Courant d'alimentation [DATA_NEEDED: Typical and maximum supply current] [DATA_NEEDED: typical and maximum supply current]
Differential Input Voltage [DATA_NEEDED: Receiver differential input voltage range] —
Common-Mode Voltage Range [DATA_NEEDED: Driver and receiver common-mode voltage range] —
Propagation Delay [DATA_NEEDED: Driver and receiver propagation delay] —
Number of Drivers — 1
Number of Receivers — 1
Logic Family — CMOS
Communication Mode — Half-duplex
Package Width — 3.90 mm
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Input Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Slew Rate — [DATA_NEEDED: slew-rate-limited mode specifications]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis