ISL83072EIUZA vs MAX3076EESD+T Comparaison
Comparaison détaillée côte à côte de ISL83072EIUZA par Renesas Electronics et MAX3076EESD+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Renesas Electronics
ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas
ISL83072EIUZA ✓ Actif
Comparaison des spécifications
| Paramètre | ISL83072EIUZA | MAX3076EESD+T |
|---|---|---|
| Marque | Renesas Electronics | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,45 | $0,00 |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Débit de données | 500 kbps (slew-rate limited, per family) | — |
| Tension d'alimentation | 3.0 V to 3.6 V (single 3.3V supply) | — |
| Bus ESD Protection (HBM) | ±15 kV (RS-485 bus pins) | — |
| Other-Pin ESD (HBM) | >7 kV | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Receiver Fail-Safe | Full fail-safe (open, short, terminated, floating) | — |
| Hot Plug Tolerant | Yes (Tx/Rx remain three-state during power-up on versions with enable pins) | — |
| Température de fonctionnement | -40 °C to +85 °C (industrial) | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-MSOP | 14-pin narrow SOIC, 3.90 mm width |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | unknown |
| Product Type | — | RS-485/RS-422 transceiver |
| Supply Voltage Range | — | 2.97 V to 3.63 V |
| Maximum Data Rate | — | 16 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| ESD Protection | — | ±15 kV |
| Fail-Safe Receiver | — | Yes; logic-high output when receiver inputs are open or shorted |
| Hot-Swap Support | — | Yes |
| Interface Standards | — | RS-485 and RS-422 |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Driver Output Protection | — | [DATA_NEEDED: driver output protection details] |
| Courant d'alimentation | — | [DATA_NEEDED: operating supply current] |
| AEC-Q100 Qualification | — | not_applicable |