ISO1042BDWR vs ADM483EAR Comparaison
Comparaison détaillée côte à côte de ISO1042BDWR par Texas Instruments et ADM483EAR par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1042BDWR - Isolated CAN Transceiver, 5Mbps, ±70V Bus Fault | TI (Tape & Reel)
ISO1042BDWR ✓ ActifComparaison des spécifications
| Paramètre | ISO1042BDWR | ADM483EAR |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Voltage Regulators | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | CAN, CAN FD | — |
| Number of Transceivers | 1 | — |
| Débit de données | 5 Mbps (CAN FD) | — |
| Isolation Voltage | 5000 VRMS | — |
| Bus Fault Protection | ±70 V DC | — |
| Common-Mode Voltage Range | ±30 V | — |
| Supply Voltage (VCC1) | 1.8 V to 5.5 V | — |
| Supply Voltage (VCC2) | 4.5 V to 5.5 V | — |
| Température de fonctionnement | -40C to +125C | — |
| Boîtier | 16-SOIC (DW) Wide-Body | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Nombre de broches | 16 | — |
| ESD Protection | [DATA_NEEDED: ESD HBM/CDM rating] | ±15 kV |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Compliance | ISO 11898-2 (2016) | — |
| Product Type | — | RS-485/RS-422 half-duplex line transceiver |
| Tension d'alimentation | — | 4.5 V to 5.5 V |
| Nominal Supply Voltage | — | 5 V |
| Maximum Data Rate | — | 250 kbps |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Maximum Bus Nodes | — | 32 transceivers |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Slew Rate | — | Slew-rate limited |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| Statut du cycle de vie | — | Production |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |