ISO1432DWR vs ISO1450BDWR Comparaison
Comparaison détaillée côte à côte de ISO1432DWR par Texas Instruments et ISO1450BDWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ ActifTexas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ ActifComparaison des spécifications
| Paramètre | ISO1432DWR | ISO1450BDWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Drivers, Receivers, Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver, Isolated | Isolated half-duplex RS-485 / RS-422 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | Half |
| Data Rate (max) | 12 Mbps | 50 Mbps |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| Température de fonctionnement | -40 °C to +125 °C | -40C to +125C |
| Boîtier | 16-pin SOIC (DW) | SOIC-16 wide-body (DW), 16 pins |
| Type de montage | Surface Mount | Surface Mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | [DATA_NEEDED: receiver hysteresis voltage] |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | ±4 kV |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | — |
| UL Recognition | UL 1577 recognized | — |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 3 (per JEDEC J-STD-020) |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Arrêt thermique | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |