ISO1450BDW vs ISO1450DW Comparaison
Comparaison détaillée côte à côte de ISO1450BDW par Texas Instruments et ISO1450DW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1450BDW - 50Mbps 5kVrms RS-485/422 Isolated Transceiver | TI
ISO1450BDW ✓ ActifTexas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ ActifComparaison des spécifications
| Paramètre | ISO1450BDW | ISO1450DW |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | RS-422, RS-485 (TIA/EIA-485-A, TIA/EIA-422-B) | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Maximum Data Rate | 50 Mbps | 50 Mbps |
| Isolation Voltage (rms) | 5000 Vrms (per UL 1577) | — |
| Working Isolation Voltage (VIOWM) | 1060 Vrms | — |
| Surge Isolation Voltage (VIOSM) | 10000 Vpk | — |
| Integrated Isolated Power | No | — |
| Supply Voltage (VCC1, VCC2) | 3 V to 5.5 V [DATA_NEEDED: each rail tolerance] | — |
| Bus Common-Mode Voltage Range | -7 V to +12 V [DATA_NEEDED: confirmed in datasheet] | — |
| Bus Pins ESD (IEC 61000-4-2) | [DATA_NEEDED: contact/air discharge level] | — |
| Bus Pins EFT (IEC 61000-4-4) | [DATA_NEEDED: transient level] | — |
| Plage de température de fonctionnement | -40 C to +125 C | -40 °C to 125 °C |
| Boîtier | SOIC-16 wide-body (DW) | 16-pin SOIC wide-body (DW) |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 2 (1 year floor life) [DATA_NEEDED: confirm from datasheet] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Isolated RS-485/RS-422 transceiver |
| Transceiver Configuration | — | 1/1 half-duplex |
| Isolation Voltage | — | 5 kVrms |
| Supply Voltage Range | — | 1.71 V to 5.5 V |
| Supported Standards | — | TIA/EIA RS-485 and RS-422 |
| Differential Communication | — | Yes |
| Direction Control | — | Half-duplex |
| EMC Protection | — | EMC protected |
| Isolation Type | — | Galvanic isolation |
| Logic Compatibility | — | 1.71 V to 5.5 V supply operation |
| Manufacturer Evaluation Module | — | ISO1410DWEVM for related ISO1410 evaluation |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |