ITS4040DEPDXUMA1 vs ITS4090QEPDXUMA1 Comparaison

Comparaison détaillée côte à côte de ITS4040DEPDXUMA1 par Infineon et ITS4090QEPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre ITS4040DEPDXUMA1 ITS4090QEPDXUMA1
Marque Infineon Infineon
Catégorie Power MOSFET Drivers Power Distribution Switches
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,12 $1,62
Product Type Dual-Channel Smart High-Side Power Switch (PROFET) Quad-Channel Smart High-Side Power Switch
Topologie 1:1 High-Side (N-Channel MOSFET, two channels) High-Side Switch (N-Channel DMOS)
Number of Channels 2 (independent) 4
Operating Voltage Range -0.3 V to 45 V (load-dump tolerant) —
Typical On-State Resistance per Channel (RDS(ON)) 60 mΩ at TJ = 125 °C —
Continuous Load Current per Channel >2 A —
Combined Peak Capability 4.1 A (per datasheet summary) —
Per-Channel Current Limit (typ.) 2.6 A —
On/Off Input Interface Logic-level GPIO compatible (3.3 V / 5 V) —
Diagnostic Output Current-sense (IS) pin, proportional to load current —
Integrated Protection Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery —
Boîtier PG-TSDSO-14 (exposed pad) PG-TSDSO-14 (exposed pad)
Type de montage Surface Mount Surface Mount
Operating Temperature (TJ) -40 °C to +150 °C (typical automotive PROFET range) —
Statut RoHS Compliant Compliant
Family — PROFET (PROtected FET) 24V/48V
Typical RDS(ON) per Channel — 90 mΩ
RDS(ON) at Tj = 125 °C — 140 mΩ (typical)
Nominal Continuous Output Current per Channel — 750 mA
Minimum Current per Channel — 500 mA
Supply Voltage Range (Operating) — 4.5 V to 45 V
Supply Voltage Range (Absolute Maximum) — -0.3 V to 45 V
On-State Input Voltage (Logic High) — [DATA_NEEDED: VIH threshold]
Plage de température de fonctionnement — -40 °C to +150 °C (Tj)
Diagnostic Feedback — Current-sense IS pin (analog proportional to load)
Protection Features — Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor)
PWM Capability — Up to 1 kHz (typical)
Niveau MSL — [DATA_NEEDED: MSL rating]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis