ITS4090QEPDXUMA1 vs ITS4040DEPDXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4090QEPDXUMA1 par Infineon et ITS4040DEPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4090QEPDXUMA1 | ITS4040DEPDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power Distribution Switches | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $2,12 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Dual-Channel Smart High-Side Power Switch (PROFET) |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 2 (independent) |
| Topologie | High-Side Switch (N-Channel DMOS) | 1:1 High-Side (N-Channel MOSFET, two channels) |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (Tj) | — |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | Compliant |
| Operating Voltage Range | — | -0.3 V to 45 V (load-dump tolerant) |
| Typical On-State Resistance per Channel (RDS(ON)) | — | 60 mΩ at TJ = 125 °C |
| Continuous Load Current per Channel | — | >2 A |
| Combined Peak Capability | — | 4.1 A (per datasheet summary) |
| Per-Channel Current Limit (typ.) | — | 2.6 A |
| On/Off Input Interface | — | Logic-level GPIO compatible (3.3 V / 5 V) |
| Diagnostic Output | — | Current-sense (IS) pin, proportional to load current |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery |
| Operating Temperature (TJ) | — | -40 °C to +150 °C (typical automotive PROFET range) |