ITS4090QEPDXUMA1 vs ITS4130QEPDXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4090QEPDXUMA1 par Infineon et ITS4130QEPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4090QEPDXUMA1 | ITS4130QEPDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power Distribution Switches | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $1,88 |
| Product Type | Quad-Channel Smart High-Side Power Switch | — |
| Family | PROFET (PROtected FET) 24V/48V | PROFET Industrial (ITS41xxQ-EP-D series) |
| Number of Channels | 4 | 4 (Quad) |
| Topologie | High-Side Switch (N-Channel DMOS) | High-Side Power Switch (1:1) |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (Tj) | — |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | MSL3 (per Infineon package handling guidelines) |
| Statut RoHS | Compliant | Compliant |
| On-State Resistance RDS(ON) | — | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) |
| Per-Channel Current | — | 650 mA (DC, per channel) |
| Load-Dump Tolerance | — | 45 V |
| Switch Type | — | N-Channel MOSFET |
| Température de fonctionnement | — | -40C to +125C (Tj) |
| Fault Protection | — | Over-current, Over-temperature, Over-voltage, Open-load detection |
| Diagnostic Output | — | Yes (status/feedback pin) |
| Reverse Polarity Protection | — | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor |
| Product Status | — | Active / Production |