ITS4100SSJNXUMA1 vs BTS3046SDRATMA1 Comparaison
Comparaison détaillée côte à côte de ITS4100SSJNXUMA1 par Infineon et BTS3046SDRATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4100SSJNXUMA1 | BTS3046SDRATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,89 | $0,74 |
| Product Type | High-Side Power Switch | Smart Low-Side Power Switch (HITFET family) |
| Topologie | 1:1 N-Channel High-Side | — |
| Maximum Continuous Load Current | 2 A | — |
| On-State Resistance RDS(on) | [DATA_NEEDED: RDS(on) typical value] | — |
| Operating Supply Voltage Range | [DATA_NEEDED: VBB min/max] | — |
| Overvoltage Protection (Load Dump) | Yes | — |
| Overload Protection | Yes | — |
| Current Limitation | Yes | — |
| Short Circuit Protection | Yes | — |
| Thermal Shutdown with Restart | Yes | — |
| Reverse Battery Protection | Yes | — |
| Fast Demagnetization of Inductive Loads | Yes | — |
| Status / Diagnostic Output | Yes | — |
| Boîtier | PG-DSO-8 (exposed pad) | PG-TO252-3-11 (DPAK, 3-pin with tab) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: Tj range] | -40 C to +150 C |
| Statut RoHS | Compliant | — |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Manufacturer | — | Infineon Technologies |
| Switch Configuration | — | 1:1 N-Channel, single channel |
| Continuous Output Current | — | 3.6 A |
| On-State Resistance (Rds(on)) | — | 95 mOhm (0.095 ohm) typical |
| Operating Voltage Range (Vbb) | — | 4.5 V to 42 V |
| Load Type | — | Low-side switch (ground-referenced load) |
| Protection Features | — | Over-temperature, short-circuit, over-current, over-voltage (clamp), ESD |
| Input Logic | — | CMOS-compatible with internal pull-down |
| Status Feedback | — | Yes (status output pin) |
| Automotive Qualification | — | AEC-Q100 (where variant specified) |
| RoHS / Lead-Free | — | Compliant / Yes |