ITS4100SSJNXUMA1 vs BTS72002EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4100SSJNXUMA1 par Infineon et BTS72002EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4100SSJNXUMA1 | BTS72002EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,89 | $1,28 |
| Product Type | High-Side Power Switch | Smart High-Side Power Switch (PROFET+2) |
| Topologie | 1:1 N-Channel High-Side | 2 x High-Side N-Channel (2:1 outputs) |
| Maximum Continuous Load Current | 2 A | — |
| On-State Resistance RDS(on) | [DATA_NEEDED: RDS(on) typical value] | — |
| Operating Supply Voltage Range | [DATA_NEEDED: VBB min/max] | — |
| Overvoltage Protection (Load Dump) | Yes | — |
| Overload Protection | Yes | — |
| Current Limitation | Yes | — |
| Short Circuit Protection | Yes | — |
| Thermal Shutdown with Restart | Yes | — |
| Reverse Battery Protection | Yes | — |
| Fast Demagnetization of Inductive Loads | Yes | — |
| Status / Diagnostic Output | Yes | — |
| Boîtier | PG-DSO-8 (exposed pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: Tj range] | — |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Yes (Automotive Grade) | — |
| Number of Channels | — | 2 |
| On-State Resistance (RDS(on)) | — | 66.5 mOhm per channel (typical) |
| Continuous Load Current | — | 1.2 A per channel |
| Limitation de courant | — | 0.8 V to 1.2 A (adjustable) |
| Operating Voltage (VS) | — | 6 V to 18 V nominal, up to 28 V extended |
| Reverse Battery Capability | — | Yes, down to -28 V |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Protection Features | — | Over-current, short-circuit, over-temperature, over-voltage, reverse polarity |
| Diagnostic Output | — | Current sense IS pin (analog) |
| Température de fonctionnement | — | -40 C to +150 C junction |
| Automotive Qualification | — | AEC-Q100 |
| Niveau MSL | — | 2A (4 weeks) |