ITS4142NHUMA1 vs BTS5014SDAAUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4142NHUMA1 par Infineon et BTS5014SDAAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4142NHUMA1 | BTS5014SDAAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,88 | $1,55 |
| Manufacturer | Infineon Technologies | — |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | 1:1 N-Channel High-Side | N-Channel vertical power MOSFET with charge pump |
| Nombre de sorties | 1 | — |
| Continuous Load Current | 1.4 A | — |
| On-Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) at 25C] | — |
| Tension d'alimentation de fonctionnement | 5 V to 34 V (load-dump tolerant to 45 V) | 5 V to 28 V (load-dump tolerant to 41 V) |
| Logic Input Voltage | Logic-level, 3.3 V and 5 V compatible | — |
| Overvoltage Protection | Yes, including load dump | — |
| Undervoltage Shutdown | Yes, with auto-restart and hysteresis | — |
| Short Circuit Protection | Yes, with current limitation | — |
| Overload Protection | Yes | — |
| Arrêt thermique | Yes | — |
| Diagnostic Feedback | Yes, open-drain status output | — |
| Inductive Load Switching | Yes, with internal clamping | — |
| Température de fonctionnement | -40C to +125C (junction) | — |
| Boîtier | PG-SOT223-4 (4-pin SOT-223) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive grade variant status] | — |
| Number of Channels | — | 1 |
| Nominal Load Current | — | 6 A |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Limitation de courant | — | [DATA_NEEDED: ICL typical] |
| Plage de température de fonctionnement | — | -40 C to +150 C (junction) |
| Load Type | — | Resistive, inductive, capacitive |
| Diagnostic Features | — | Current sense (IS), fault status (ST), open-drain |
| Protection Functions | — | Over-current, over-temperature, over-voltage, ESD |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM rating] |
| Process Technology | — | Infineon SMART7 |