ITS4142NHUMA1 vs ITS4880R Comparaison
Comparaison détaillée côte à côte de ITS4142NHUMA1 par Infineon et ITS4880R par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4142NHUMA1 | ITS4880R |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,88 | $5,89 |
| Manufacturer | Infineon Technologies | — |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | 1:1 N-Channel High-Side | — |
| Nombre de sorties | 1 | — |
| Continuous Load Current | 1.4 A | — |
| On-Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) at 25C] | — |
| Tension d'alimentation de fonctionnement | 5 V to 34 V (load-dump tolerant to 45 V) | — |
| Logic Input Voltage | Logic-level, 3.3 V and 5 V compatible | — |
| Overvoltage Protection | Yes, including load dump | — |
| Undervoltage Shutdown | Yes, with auto-restart and hysteresis | — |
| Short Circuit Protection | Yes, with current limitation | — |
| Overload Protection | Yes | — |
| Arrêt thermique | Yes | — |
| Diagnostic Feedback | Yes, open-drain status output | Common diagnostic output (open-load, fault) |
| Inductive Load Switching | Yes, with internal clamping | — |
| Température de fonctionnement | -40C to +125C (junction) | -40C to +125C (junction) |
| Boîtier | PG-SOT223-4 (4-pin SOT-223) | PG-DSO-36-26 |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive grade variant status] | — |
| Technology | — | Smart SIPMOS (N-channel vertical power FET + charge pump, monolithic) |
| Number of Channels | — | 8 |
| Nominal Per-Channel Current | — | 0.625 A |
| Operating Supply Voltage (Vbb) | — | 11 V to 45 V |
| Load Dump Transient Rating | — | 60 V |
| Input Compatibility | — | Ground-referenced CMOS or Vbb/2 |
| Protection Features | — | Overload, short-circuit, over-temperature, over-voltage clamp, ESD |
| Channel-to-Channel Matching | — | Matched N-FET outputs with shared charge pump |
| Target Application | — | 24 V DC industrial loads |