ITS41K0SMENHUMA1 vs BTS70021EPPXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS41K0SMENHUMA1 par Infineon et BTS70021EPPXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | ITS41K0SMENHUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,59 | $1,32 |
| Part Number | ITS41K0SMENHUMA1 (ITS41K0S-ME-N) | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET Industrial MINI-PROFET | PROFET+2 12V |
| Fonction | Smart High-Side Power Switch | — |
| Topologie | High-Side Switch, 1:1 N-Channel | Smart High-Side Switch, N-Channel MOSFET |
| Supply Voltage Range (Vbb) | 4.9 V to 60 V | — |
| Maximum Continuous Load Current | 200 mA | 21 A |
| On-Resistance R_DS(on) (typ) | 1 Ω | — |
| On-Resistance R_DS(on) (max) | 800 mΩ [DATA_NEEDED: per datasheet conditions] | — |
| Number of Channels | 1 | — |
| Boîtier | PG-SOT223-4 (SOT-223-4) | PG-TSDSO-14-22 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Operating Temperature (Tj) | -40°C to +125°C | — |
| Protection Features | Thermal Shutdown, Overcurrent Limit, Overvoltage Clamp, ESD Protection, Reverse Battery | — |
| Diagnostic Output | Yes (status/feedback pin) | — |
| Statut RoHS | Compliant | Compliant (Green Product) |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Plage de température de fonctionnement | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |