ITS4300SSJDXUMA1 vs ITS4090QEPDXUMA1 Comparaison

Comparaison détaillée côte à côte de ITS4300SSJDXUMA1 par Infineon et ITS4090QEPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre ITS4300SSJDXUMA1 ITS4090QEPDXUMA1
Marque Infineon Infineon
Catégorie Power MOSFET Drivers Power Distribution Switches
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,89 $1,62
Part Number ITS4300SSJDXUMA1 —
Manufacturer Infineon Technologies —
Product Family PROFET (PROtected FET) Industrial —
Fonction Smart high-side power switch / load driver —
Switch Type 1:1 N-Channel high-side —
Output Current (Continuous) 400 mA —
On-State Resistance RDS(on) 300 mΩ (typical) —
Supply Voltage Range [DATA_NEEDED: operating supply voltage range] —
Load Voltage 12 V / 24 V DC applications —
Control Interface CMOS-compatible logic input —
Protection Features Overload, short-circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown, fast demagnetization Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor)
ESD Protection Yes —
Plage de température de fonctionnement [DATA_NEEDED: full operating temperature range] -40 °C to +150 °C (Tj)
Boîtier PG-DSO-8 PG-TSDSO-14 (exposed pad)
Type de montage Surface Mount Surface Mount
Qualification Industrial per JEDEC JESD47 —
RoHS Compliance Compliant (per Infineon product page) —
Niveau MSL [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL rating]
Product Type — Quad-Channel Smart High-Side Power Switch
Family — PROFET (PROtected FET) 24V/48V
Number of Channels — 4
Topologie — High-Side Switch (N-Channel DMOS)
Typical RDS(ON) per Channel — 90 mΩ
RDS(ON) at Tj = 125 °C — 140 mΩ (typical)
Nominal Continuous Output Current per Channel — 750 mA
Minimum Current per Channel — 500 mA
Supply Voltage Range (Operating) — 4.5 V to 45 V
Supply Voltage Range (Absolute Maximum) — -0.3 V to 45 V
On-State Input Voltage (Logic High) — [DATA_NEEDED: VIH threshold]
Diagnostic Feedback — Current-sense IS pin (analog proportional to load)
PWM Capability — Up to 1 kHz (typical)
Statut RoHS — Compliant

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis