ITS6080SEPDXUMA1 vs ITS4075QEPDXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS6080SEPDXUMA1 par Infineon et ITS4075QEPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS6080SEPDXUMA1 | ITS4075QEPDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,72 | $2,45 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial 75 mOhm | — |
| Number of Channels | 1 | 4 |
| On-State Resistance (Rds(on)) | 75 mOhm typical | — |
| Continuous Load Current | 8 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | 62 V | — |
| Switch Type | N-Channel high-side | High-side, N-channel MOSFET with charge pump |
| Configuration de sortie | 1:1 (high-side) | — |
| Boîtier | PG-TSDSO-14 (14-pin TSDSO with exposed pad) | PG-TSDSO-14 (14-pin TSSOP with exposed pad) |
| Plage de température de fonctionnement | -40 C to +150 C | -40 °C to +150 °C |
| Diagnostic Features | Current sense output, fault feedback | — |
| Protection Features | Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection | Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Automotive Qualification | AEC-Q100 qualified | — |
| Part Number | — | ITS4075QEPDXUMA1 |
| Part Family | — | ITS4075Q-EP-D (PROFET Industrial) |
| Fonction | — | Quad-channel smart high-side power switch / load driver |
| Typical On-State Resistance (RDS(ON)) | — | 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C |
| Maximum Load Current per Channel | — | 2.6 A |
| Tension d'alimentation de fonctionnement | — | [DATA_NEEDED: nominal supply range minimum and maximum] |
| Maximum Supply Voltage | — | 45 V |
| On-State Resistance Max (per channel) | — | [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] |
| Junction Temperature Maximum | — | +150 °C |
| Diagnostic Feedback | — | Current proportional sense (IS pin) per channel |
| Integrated Charge Pump | — | Yes |
| Reverse Polarity Protection | — | Requires external 150 Ω resistor or reverse diode (per datasheet) |
| Statut RoHS | — | Compliant |
| Lead-Free | — | Yes |