ITS724GFUMA1 vs TLE75080ESDXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS724GFUMA1 par Infineon et TLE75080ESDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS724GFUMA1 | TLE75080ESDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,30 | $2,55 |
| Manufacturer | Infineon Technologies | — |
| Part Series | ITS724G / PROFET Industrial | — |
| Fonction | 4-Channel Smart High-Side Power Switch | — |
| Topologie | High-Side N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 8 |
| Continuous Output Current per Channel | 3.3 A | — |
| On-State Resistance (typ) | 65 mΩ per channel | — |
| Supply Voltage Range (Vbb) | -10 V to 16 V | — |
| Load Dump Protection | External resistor required | — |
| Input Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Open-drain status flag | — |
| Plage de température de fonctionnement | -40 C to +85 C (industrial) | -40 C to +150 C |
| Boîtier | PG-DSO-20-32 | PG-TSDSO-24-21 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Technology | Smart SIPMOS (vertical MOSFET with charge pump) | — |
| Channel Configuration | — | High-side, N-channel MOSFET |
| Per-Channel Output Current | — | 330 mA |
| Supply Voltage Range | — | 4.5 V to 28 V |
| Load Dump Tolerance | — | 40 V |
| Cranking Voltage (Limp Home) | — | 3.0 V |
| On-State Resistance (typ per channel) | — | 1.5 ohm |
| Communication Interface | — | 16-bit SPI (daisy-chain capable) |
| Diagnostic Features | — | Open-load detect (on/off), overcurrent, overtemperature, short to battery/GND |
| Protection Functions | — | Reverse battery, load dump, thermal shutdown, current limit |
| Niveau MSL | — | 2A |