KSZ8001LI vs KSZ8001LIA3 Comparaison
Comparaison détaillée côte à côte de KSZ8001LI par Microchip Technology et KSZ8001LIA3 par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8001LI - 10/100 PHY Transceiver, MII/RMII/SMII | Microchip (Tape & Reel)
KSZ8001LI ✓ ActifComparaison des spécifications
| Paramètre | KSZ8001LI | KSZ8001LIA3 |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Ethernet Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | 10/100BASE-TX/100BASE-FX Physical Layer Transceiver | — |
| Host Interface | MII, RMII, SMII (selectable via strap pins) | MII, RMII, and SMII |
| Number of Drivers/Receivers | [DATA_NEEDED: explicit count] | [DATA_NEEDED: number of drivers and receivers] |
| Supply Voltage (Analog) | 3.3 V | — |
| Supply Voltage (Core) | 1.8 V (internal LDO from 3.3 V) | — |
| Supply Voltage (VDDIO) | 3.3 V or 2.5 V | — |
| Typical Power Consumption | 172 mW | — |
| Cable Reach (TX/Copper) | 130 m+ standard Cat-5 | — |
| Cable Diagnostics | LinkMD TDR, up to 200 m, ±2 m accuracy | LinkMD |
| Fiber Support | 100BASE-FX via external transceiver | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Auto-Negotiation | IEEE 802.3u Clause 28 | — |
| Reference Clock | 25 MHz (50 MHz for RMII) | — |
| Température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Type de montage | Surface Mount | Surface mount |
| Packaging | Tape & Reel (-TR suffix) | Tape and reel |
| Statut RoHS | Compliant (RoHS3 per distributor data) | [DATA_NEEDED: RoHS compliance] |
| Lead-Free | Yes | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Ethernet physical-layer transceiver (PHY) |
| Supported Copper Media | — | 10BASE-T and 100BASE-TX |
| Supported Fiber Media | — | 100BASE-FX |
| Supply Voltage Options | — | 1.8 V and 3.3 V |
| Datasheet Revision | — | 1.03 |
| Transceiver Type | — | Full-duplex transceiver |
| PHY Speed Support | — | 10 Mbps and 100 Mbps |
| Copper Standard Support | — | 10BASE-T/100BASE-TX |
| Fiber Standard Support | — | 100BASE-FX |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |