KSZ8001LI vs KSZ8001S Comparaison
Comparaison détaillée côte à côte de KSZ8001LI par Microchip Technology et KSZ8001S par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8001LI - 10/100 PHY Transceiver, MII/RMII/SMII | Microchip (Tape & Reel)
KSZ8001LI ✓ Actif
Comparaison des spécifications
| Paramètre | KSZ8001LI | KSZ8001S |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Ethernet Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Fonction | 10/100BASE-TX/100BASE-FX Physical Layer Transceiver | — |
| Host Interface | MII, RMII, SMII (selectable via strap pins) | — |
| Number of Drivers/Receivers | [DATA_NEEDED: explicit count] | — |
| Supply Voltage (Analog) | 3.3 V | — |
| Supply Voltage (Core) | 1.8 V (internal LDO from 3.3 V) | — |
| Supply Voltage (VDDIO) | 3.3 V or 2.5 V | — |
| Typical Power Consumption | 172 mW | — |
| Cable Reach (TX/Copper) | 130 m+ standard Cat-5 | — |
| Cable Diagnostics | LinkMD TDR, up to 200 m, ±2 m accuracy | — |
| Fiber Support | 100BASE-FX via external transceiver | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Auto-Negotiation | IEEE 802.3u Clause 28 | — |
| Reference Clock | 25 MHz (50 MHz for RMII) | — |
| Température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 48-LQFP (7 x 7 mm) | 48-SSOP |
| Type de montage | Surface Mount | Surface mount |
| Packaging | Tape & Reel (-TR suffix) | — |
| Statut RoHS | Compliant (RoHS3 per distributor data) | — |
| Lead-Free | Yes | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Ethernet Standards Supported | — | 10BASE-T, 100BASE-TX, and 100BASE-FX |
| Core Supply Voltage | — | 1.8 V |
| I/O Supply Voltage | — | 3.3 V |
| Host Interfaces | — | MII, RMII, and SMII |
| Power Consumption | — | 250 mW |
| Standard Cable Length | — | Greater than 130 m |
| LinkMD Cable-Length Measurement Range | — | Up to 200 m |
| LinkMD Cable-Length Accuracy | — | ±2 m |
| Configuration Interface | — | MII serial management port |
| Copper Data Rate | — | 10 Mb/s and 100 Mb/s |
| Courant d'alimentation | — | [DATA_NEEDED: supply current by operating mode] |
| Media Interface | — | [DATA_NEEDED: supported media-interface details] |
| Compliance | — | [DATA_NEEDED: RoHS, REACH, and other compliance status] |