KSZ8001LI vs LAN8742-CZ Comparaison
Comparaison détaillée côte à côte de KSZ8001LI par Microchip Technology et LAN8742-CZ par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8001LI - 10/100 PHY Transceiver, MII/RMII/SMII | Microchip (Tape & Reel)
KSZ8001LI ✓ Actif
Comparaison des spécifications
| Paramètre | KSZ8001LI | LAN8742-CZ |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Ethernet Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Obsolete |
| Fonction | 10/100BASE-TX/100BASE-FX Physical Layer Transceiver | — |
| Host Interface | MII, RMII, SMII (selectable via strap pins) | RMII |
| Number of Drivers/Receivers | [DATA_NEEDED: explicit count] | — |
| Supply Voltage (Analog) | 3.3 V | — |
| Supply Voltage (Core) | 1.8 V (internal LDO from 3.3 V) | — |
| Supply Voltage (VDDIO) | 3.3 V or 2.5 V | — |
| Typical Power Consumption | 172 mW | — |
| Cable Reach (TX/Copper) | 130 m+ standard Cat-5 | — |
| Cable Diagnostics | LinkMD TDR, up to 200 m, ±2 m accuracy | Supported |
| Fiber Support | 100BASE-FX via external transceiver | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | HP Auto-MDIX supported |
| Auto-Negotiation | IEEE 802.3u Clause 28 | Supported |
| Reference Clock | 25 MHz (50 MHz for RMII) | — |
| Température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 48-LQFP (7 x 7 mm) | 24-pin QFN, 4 x 4 mm |
| Type de montage | Surface Mount | Surface mount |
| Packaging | Tape & Reel (-TR suffix) | — |
| Statut RoHS | Compliant (RoHS3 per distributor data) | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | 10/100 Fast Ethernet PHY transceiver |
| Maximum Data Rate | — | 100 Mbps |
| Supported Standards | — | IEEE 802.3 and IEEE 802.3u |
| Copper Modes | — | 10BASE-T and 100BASE-TX |
| Driver/Receiver Configuration | — | 1/1 |
| I/O Voltage | — | 1.2 V and 3.3 V |
| Energy Efficient Ethernet | — | IEEE 802.3az family support identified |
| Wake-On-LAN | — | Supported for the LAN8742 family |
| Operating Speed Modes | — | 10 Mbps and 100 Mbps |
| Duplex Operation | — | Full-duplex RMII support identified |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |