KSZ8001LIA3 vs KSZ8001LI Comparaison
Comparaison détaillée côte à côte de KSZ8001LIA3 par Microchip Technology et KSZ8001LI par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8001LI - 10/100 PHY Transceiver, MII/RMII/SMII | Microchip (Tape & Reel)
KSZ8001LI ✓ ActifComparaison des spécifications
| Paramètre | KSZ8001LIA3 | KSZ8001LI |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Ethernet Transceivers |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Ethernet physical-layer transceiver (PHY) | — |
| Supported Copper Media | 10BASE-T and 100BASE-TX | — |
| Supported Fiber Media | 100BASE-FX | — |
| Host Interface | MII, RMII, and SMII | MII, RMII, SMII (selectable via strap pins) |
| Supply Voltage Options | 1.8 V and 3.3 V | — |
| Cable Diagnostics | LinkMD | LinkMD TDR, up to 200 m, ±2 m accuracy |
| Boîtier | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Type de montage | Surface mount | Surface Mount |
| Packaging | Tape and reel | Tape & Reel (-TR suffix) |
| Datasheet Revision | 1.03 | — |
| Transceiver Type | Full-duplex transceiver | — |
| PHY Speed Support | 10 Mbps and 100 Mbps | — |
| Copper Standard Support | 10BASE-T/100BASE-TX | — |
| Fiber Standard Support | 100BASE-FX | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | Compliant (RoHS3 per distributor data) |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Number of Drivers/Receivers | [DATA_NEEDED: number of drivers and receivers] | [DATA_NEEDED: explicit count] |
| Fonction | — | 10/100BASE-TX/100BASE-FX Physical Layer Transceiver |
| Supply Voltage (Analog) | — | 3.3 V |
| Supply Voltage (Core) | — | 1.8 V (internal LDO from 3.3 V) |
| Supply Voltage (VDDIO) | — | 3.3 V or 2.5 V |
| Typical Power Consumption | — | 172 mW |
| Cable Reach (TX/Copper) | — | 130 m+ standard Cat-5 |
| Fiber Support | — | 100BASE-FX via external transceiver |
| Auto-MDIX | — | Yes (HP Auto-MDIX) |
| Auto-Negotiation | — | IEEE 802.3u Clause 28 |
| Reference Clock | — | 25 MHz (50 MHz for RMII) |
| Température de fonctionnement | — | -40 C to +85 C |
| Lead-Free | — | Yes |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |