KSZ8021RNL vs KSZ8031RNL Comparaison

Comparaison détaillée côte à côte de KSZ8021RNL par Microchip Technology et KSZ8031RNL par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ8021RNL KSZ8021RNL - 10/100 Ethernet PHY RMII | Microchip

KSZ8021RNL - 10/100 Ethernet PHY RMII | Microchip

KSZ8021RNL ✓ Actif
Microchip Technology
KSZ8031RNL KSZ8031RNL - 10/100 Ethernet PHY | Microchip Technology

KSZ8031RNL - 10/100 Ethernet PHY | Microchip Technology

KSZ8031RNL ✓ Actif

Comparaison des spécifications

Paramètre KSZ8021RNL KSZ8031RNL
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 10Base-T/100Base-TX Ethernet physical-layer transceiver 10Base-T/100Base-TX Ethernet physical layer transceiver
Ethernet Speed Support 10 Mbps and 100 Mbps 10 Mb/s and 100 Mb/s
Physical Layer Standards 10Base-T and 100Base-TX —
Media Interface Reduced Media Independent Interface (RMII) 10Base-T/100Base-TX
RMII Reference Clock 50 MHz 25 MHz
Supply Configuration Single supply —
Cable Type CAT-5 unshielded twisted pair (UTP) —
Boîtier 24-QFN with exposed pad, 4 mm x 4 mm 24-QFN (4 x 4 mm)
Type de montage Surface mount Surface mount
Interrupt Support Dedicated interrupt pin —
Control Interface PHY status and control registers —
Polling Requirement Processor polling not required when interrupt is used —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Maximum Link Rate 100 Mbps —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Résistance thermique [DATA_NEEDED: junction-to-ambient thermal resistance] —
Termination Scheme [DATA_NEEDED: integrated cable termination details] —
Tension d'alimentation — 3.3 V
Interface — Reduced Media Independent Interface (RMII)
Duplex Mode — Full duplex
Cable Standard — CAT-5 unshielded twisted pair (UTP)
Port Count — 1 port
Data Link Standard — Ethernet
Evaluation Board — KSZ8031RNL-EVAL
Maximum Ethernet Cable Length — [DATA_NEEDED: maximum Ethernet cable length]
RMII Clock Tolerance — [DATA_NEEDED: RMII clock tolerance]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis