KSZ8041MLL vs KSZ8041TL Comparaison
Comparaison détaillée côte à côte de KSZ8041MLL par Microchip Technology et KSZ8041TL par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | KSZ8041MLL | KSZ8041TL |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Ethernet PHYs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Ethernet Data Rate | 10 Mb/s and 100 Mb/s | — |
| Supported Physical Media | 10BASE-T and 100BASE-TX | — |
| Host Interface | Full MII | — |
| Tension d'alimentation | 3.3 V | [DATA_NEEDED: supply voltage range] |
| Supply Configuration | Single supply | — |
| Transceiver Count | 1 | — |
| Port Count | 1 Ethernet port | — |
| Boîtier | 48-LQFP | 48-TQFP (7 x 7 mm) |
| Package Body Size | 7 mm x 7 mm | — |
| Nombre de broches | 48 pins | — |
| Type de montage | Surface mount | Surface mount |
| Automatic Crossover | HP Auto MDI/MDIX | — |
| Strapping Configuration | Speed, duplex, auto-negotiation, power-down, and PHY address | — |
| Strapping Latching | Power-up and reset | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Maximum Link Distance | [DATA_NEEDED: maximum link distance] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supported Data Rates | — | 10 Mb/s and 100 Mb/s |
| Host Interfaces | — | MII, RMII, and SMII |
| Supply Architecture | — | Single-supply |
| Cable Standard | — | 10BASE-T and 100BASE-TX |
| Mixed-Signal Design | — | Yes; intended to extend signaling distance while reducing power consumption |
| Auto MDI/MDIX | — | HP Auto MDI/MDIX |
| Interrupt Signal | — | INTRP on pin 32; optional PHY-register status-update signal |
| Number of Drivers/Receivers | — | 1 driver and 1 receiver |
| Device Type | — | Ethernet interface IC / physical-layer transceiver |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Interface Clock | — | [DATA_NEEDED: clock frequency] |
| Ethernet Magnetics | — | [DATA_NEEDED: supported magnetics and isolation configuration] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |