KSZ8041RNL vs KSZ8041NLJ-TR Comparaison

Comparaison détaillée côte à côte de KSZ8041RNL par Microchip Technology et KSZ8041NLJ-TR par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ8041RNL KSZ8041RNL - 10/100BASE-TX RMII PHY | Microchip Technology

KSZ8041RNL - 10/100BASE-TX RMII PHY | Microchip Technology

KSZ8041RNL ✓ Actif
Microchip Technology
KSZ8041NLJ-TR KSZ8041NLJ-TR 10/100 Ethernet PHY | Microchip | 32-QFN

KSZ8041NLJ-TR 10/100 Ethernet PHY | Microchip | 32-QFN

KSZ8041NLJ-TR ✓ Actif

Comparaison des spécifications

Paramètre KSZ8041RNL KSZ8041NLJ-TR
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 10BASE-T/100BASE-TX physical-layer transceiver 10/100 Ethernet physical-layer transceiver
Ethernet Data Rate 10 Mb/s and 100 Mb/s —
Host Interface Full RMII MII, RMII, and SMII
Number of Drivers/Receivers 1/1 —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Configuration Single supply Single supply
Input Reference Clock 25 MHz crystal —
RMII Reference Output 50 MHz to the media access controller —
External 50 MHz System Clock Not required for the RNL version —
Boîtier 32-VFQFN exposed-pad package, 5 mm x 5 mm 32-QFN (5 mm x 5 mm)
Type de montage Surface mount Surface mount
Lead-Free Package Option Yes, 32-pin lead-free QFN package —
Power-Down Configuration Configurable through power-up strapping —
Speed and Duplex Configuration Configurable through power-up strapping —
Auto-Negotiation Configuration Configurable through power-up strapping —
PHY Address Configuration Configurable through power-up strapping —
Ethernet Magnetics External 10/100BASE-TX magnetic isolation required —
Statut RoHS [DATA_NEEDED: RoHS compliance status] —
REACH Status [DATA_NEEDED: REACH compliance status] —
Ethernet Support — 10BASE-T and 100BASE-TX
Nominal Data Rate — 10 Mb/s and 100 Mb/s
Tension d'alimentation — 3.3 V
Maximum Operating Temperature — 125 °C
Cable Distance — [DATA_NEEDED: maximum supported Ethernet cable length]
Auto MDI/MDIX — Supported
Architecture — Mixed-signal Ethernet physical layer
Exposed Pad — Present in 32-QFN package
Débit de données — 100 Mb/s maximum
RoHS Compliance — unknown
REACH Compliance — unknown
AEC-Q100 Qualification — not_applicable

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis