KSZ8041TLI vs KSZ8041FTL-S Comparaison

Comparaison détaillée côte à côte de KSZ8041TLI par Microchip Technology et KSZ8041FTL-S par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ8041TLI KSZ8041TLI - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TLI - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TLI ✓ Actif
Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ Actif

Comparaison des spécifications

Paramètre KSZ8041TLI KSZ8041FTL-S
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock —
Prix unitaire (USD) $3,61 —
Device Type 10Base-T/100Base-TX Ethernet physical-layer transceiver —
Supported Data Rates 10 Mbps and 100 Mbps —
Channel Count 1 channel —
Host Interfaces MII, RMII, and SMII —
Supply Type Single supply Single supply
Typical Operating Supply Voltage 3.3 V —
Operating Voltage Range 3.135 V to 3.465 V —
Ethernet Standards IEEE 802.3 and IEEE 802.3u 10Base-T and 100Base-TX
Auto-Negotiation Enabled by hardware pin strapping on pin 42 or software through register 0h bit 12 —
Auto-Negotiation Standard Clause 28 of the IEEE 802.3u specification —
Package Type 48-pin TQFP —
Package Dimensions 7 mm x 7 mm —
Type de montage Surface mount Surface mount
Nombre de broches 48 pins 48 pins
Statut RoHS [DATA_NEEDED: verified RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: verified REACH status] [DATA_NEEDED: REACH status]
Plage de température de fonctionnement [DATA_NEEDED: verified operating temperature range] —
MDI/MDIX Support HP Auto MDI/MDIX —
Product Type — 10/100 Ethernet physical-layer transceiver
Host Interface — MII, RMII, and SMII
Number of Transmitters — 1 channel
Number of Receivers — 1 channel
Supply Voltage Range — 3.135 V to 3.465 V
Auto MDI/MDIX Support — HP Auto MDI/MDIX
Boîtier — 48-TQFP, 7 x 7 mm
Débit de données — 10 Mb/s and 100 Mb/s
Mixed-Signal Architecture — Extended signaling distance and reduced power consumption
Configuration Strapping — Speed, duplex, auto-negotiation, power-down, and PHY address
Température de fonctionnement — [DATA_NEEDED: operating temperature range]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis