KSZ9021GQI vs KSZ9021GQ Comparaison

Comparaison détaillée côte à côte de KSZ9021GQI par Microchip Technology et KSZ9021GQ par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9021GQI KSZ9021GQI - Gigabit Ethernet PHY, GMII/MII, 128-PQFP | Microchip

KSZ9021GQI - Gigabit Ethernet PHY, GMII/MII, 128-PQFP | Microchip

KSZ9021GQI ⚠ Dernier achat
Microchip Technology
KSZ9021GQ KSZ9021GQ - Gigabit Ethernet Transceiver | Microchip

KSZ9021GQ - Gigabit Ethernet Transceiver | Microchip

KSZ9021GQ Unknown

Comparaison des spécifications

Paramètre KSZ9021GQI KSZ9021GQ
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Dernier achat Unknown
Fonction 10/100/1000 Base-T Ethernet PHY transceiver —
Débit de données 10 Mbps / 100 Mbps / 1000 Mbps —
MAC Interface GMII, MII —
Number of Ports 1 —
Number of Drivers / Receivers 8 / 8 —
Supply Voltage Range 3.135 V to 3.465 V —
Typical Supply Voltage 3.3 V —
Plage de température de fonctionnement -40 C to +85 C [DATA_NEEDED: operating temperature range]
Boîtier 128-PQFP (14x20 mm) 128-pin lead-free PQFP, 14 x 20 mm
Auto-MDIX Yes —
Auto-Negotiation Yes (IEEE 802.3u/clause 28/40) —
MTL Termination Integrated (no external resistors on MDI lines) —
Reference Clock 25 MHz external —
Management Interface MDC/MDIO (IEEE 802.3 clause 22/45) —
LED Indicators Two per-port (speed and link/activity configurable) —
Type de montage Surface Mount Surface mount
Compliance IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) —
Statut RoHS Compliant [DATA_NEEDED: RoHS status]
Product Type — Single-port Gigabit Ethernet transceiver
Supported Ethernet Speeds — 10/100/1000 Mbps
Supported Media — 10/100/1000Base-T
Digital Host Interface — GMII/MII
GMII Data Rate — 1000 Mbps
MII Data Rates — 10 Mbps and 100 Mbps
Tension d'alimentation — 3.3 V
Transceiver Classification — 8/8 transceiver
Auto-Negotiation Standard — IEEE 802.3 Clause 28
Cable Type — UTP
Cable Diagnostic Method — Micrel LinkMD TDR-based diagnostics
Board Fault Detection — Parametric NAND tree support
Loopback Modes — Remote and local
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis