KSZ9031MNXCA vs KSZ9031MNXCC Comparaison

Comparaison détaillée côte à côte de KSZ9031MNXCA par Microchip Technology et KSZ9031MNXCC par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031MNXCA KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA ✓ Actif
Microchip Technology
KSZ9031MNXCC KSZ9031MNXCC - Gigabit Ethernet PHY Transceiver 64-QFN | Microchip

KSZ9031MNXCC - Gigabit Ethernet PHY Transceiver 64-QFN | Microchip

KSZ9031MNXCC ✓ Actif

Comparaison des spécifications

Paramètre KSZ9031MNXCA KSZ9031MNXCC
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Automotive Ethernet physical-layer transceiver Ethernet PHY Transceiver
Ethernet Port Count 1 port —
Supported Ethernet Speeds 10Base-T, 100Base-TX, and 1000Base-T —
Maximum Nominal Ethernet Rate 1000 Mb/s —
Medium Support Standard CAT-5 unshielded twisted pair —
Host Interface GMII and MII —
Cable Diagnostics LinkMD —
Automotive Qualification Automotive qualified —
Supply Voltage Options 3.3 V, 2.5 V, and 1.8 V —
Boîtier 48-QFN, 7x7 mm 64-pin QFN (8x8 mm), lead-free
Type de montage Surface mount Surface Mount
Auto-Negotiation IEEE 802.3 Clause 28 Yes (10/100/1000 Mbps)
Maximum Gigabit Ethernet Cable Length [DATA_NEEDED: maximum 1000Base-T cable length] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Media Interface Magnetics [DATA_NEEDED: supported magnetic-component configuration] —
Statut RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Grade [DATA_NEEDED: AEC-Q100 qualification grade] —
Débit de données — 10/100/1000 Mbps
Network Standard — IEEE 802.3 (10Base-T/100Base-TX/1000Base-T)
MAC Interface — GMII / MII
I/O Voltage Tolerance — 3.3V / 2.5V / 1.8V
Tension d'alimentation — 3.3V (single supply)
Power Consumption (Typical) — ~0.7W at 1000 Mbps full-duplex
Auto-MDIX — Yes (HP Auto-MDIX)
Wake-on-LAN — Yes
LED Interface — Programmable multi-LED
Température de fonctionnement — 0C to +70C (commercial grade, CC suffix)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis