KSZ9031MNXCA vs KSZ9031RNXIC Comparaison

Comparaison détaillée côte à côte de KSZ9031MNXCA par Microchip Technology et KSZ9031RNXIC par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031MNXCA KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA ✓ Actif

Comparaison des spécifications

Paramètre KSZ9031MNXCA KSZ9031RNXIC
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Automotive Ethernet physical-layer transceiver Ethernet Physical Layer Transceiver (PHY)
Ethernet Port Count 1 port —
Supported Ethernet Speeds 10Base-T, 100Base-TX, and 1000Base-T —
Maximum Nominal Ethernet Rate 1000 Mb/s —
Medium Support Standard CAT-5 unshielded twisted pair —
Host Interface GMII and MII —
Cable Diagnostics LinkMD LinkMD TDR-based cable diagnostics
Automotive Qualification Automotive qualified —
Supply Voltage Options 3.3 V, 2.5 V, and 1.8 V —
Boîtier 48-QFN, 7x7 mm 48-pin QFN (7x7 mm) with Exposed Pad
Type de montage Surface mount Surface Mount
Auto-Negotiation IEEE 802.3 Clause 28 Yes (IEEE 802.3u/clause 28)
Maximum Gigabit Ethernet Cable Length [DATA_NEEDED: maximum 1000Base-T cable length] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -40 C to +85 C (Industrial)
Media Interface Magnetics [DATA_NEEDED: supported magnetic-component configuration] —
Statut RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Grade [DATA_NEEDED: AEC-Q100 qualification grade] —
Débit de données — 10/100/1000 Mbps (Triple-Speed)
Network Standard — IEEE 802.3 10BASE-T / 100BASE-TX / 1000BASE-T
Interface to MAC — RGMII (version 2.0, on-chip delay)
Number of Channels — 4/4 Transceiver (Full Duplex)
Tension d'alimentation — 1.8 V / 2.5 V / 3.3 V
Cable Type — CAT-5 Unshielded Twisted Pair (UTP)
Auto-MDI/MDIX — Yes
Wake-on-LAN — Yes (Magic Packet and wake-up frame)
Jumbo Frame Support — Yes (up to 9 KB)
Niveau MSL — MSL3 (per JEDEC J-STD-020)
Reference Clock — 25 MHz crystal or LVCMOS input

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis