KSZ9031RNXCC vs KSZ9031RNXVB-VAO Comparaison

Comparaison détaillée côte à côte de KSZ9031RNXCC par Microchip Technology et KSZ9031RNXVB-VAO par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031RNXCC KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC ✓ Actif
Microchip Technology
KSZ9031RNXVB-VAO KSZ9031RNXVB-VAO - Gigabit Ethernet RGMII Transceiver AEC-Q100 | Microchip

KSZ9031RNXVB-VAO - Gigabit Ethernet RGMII Transceiver AEC-Q100 | Microchip

KSZ9031RNXVB-VAO ✓ Actif

Comparaison des spécifications

Paramètre KSZ9031RNXCC KSZ9031RNXVB-VAO
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,05 $5,65
Product Type Ethernet Physical Layer Transceiver (PHY) Ethernet Transceiver (PHY)
Débit de données 10 / 100 / 1000 Mbps (triple-speed) 10/100/1000 Mbps
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) —
MAC Interface RGMII (Version 2.0 compliant, on-chip delay) —
Cable Interface 4 differential pairs, CAT-5 UTP, 100-ohm differential —
Management Interface MDIO / MDC (IEEE 802.3 clause 22/45) —
Supply Voltage (Analog/DVDD) 3.3 V —
Core Supply 1.2 V (on-chip LDO controller + external MOSFET) —
On-chip Features Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction —
Power Saving Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode —
Boîtier 48-pin QFN (7x7 mm) 48-pin WQFN (wettable-flank)
Type de montage Surface Mount Surface Mount
Température de fonctionnement 0C to +70C (commercial grade, CC suffix) -40C to +105C (AEC-Q100 Grade 2)
Niveau MSL 3 [DATA_NEEDED: MSL rating]
Statut RoHS Compliant —
Standards Compliance — IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
MAC-Side Interface — RGMII (Version 2.0 compliant, on-chip delay)
Tension d'alimentation — 3.3 V (single supply; internal LDO for core)
MAC I/O Voltage Tolerance — 3.3 V / 2.5 V / 1.8 V
Automotive Qualification — AEC-Q100 qualified (VAO suffix)
Energy-Efficient Ethernet — IEEE 802.3az supported
Auto-Negotiation — Yes (with HP Auto-MDIX)
Wake-on-LAN — Supported
Loopback Modes — Remote and local loopback
Reference Clock — 25 MHz crystal or 125 MHz LVCMOS reference
Typical Active Power — 450 mW at 1 Gbps
Lead-Free / RoHS — Yes (lead-free)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis