KSZ9031RNXIC-TR vs KSZ9031RNXCC Comparaison

Comparaison détaillée côte à côte de KSZ9031RNXIC-TR par Microchip Technology et KSZ9031RNXCC par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031RNXIC-TR KSZ9031RNXIC-TR - GbE PHY Transceiver RGMII 48-QFN | Microchip

KSZ9031RNXIC-TR - GbE PHY Transceiver RGMII 48-QFN | Microchip

KSZ9031RNXIC-TR ✓ Actif
Microchip Technology
KSZ9031RNXCC KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC ✓ Actif

Comparaison des spécifications

Paramètre KSZ9031RNXIC-TR KSZ9031RNXCC
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,30 $4,05
Fonction Ethernet Physical Layer Transceiver (PHY) —
Standards Supported 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3, 802.3u, 802.3ab) —
Number of Transceivers 1 —
Débit de données 10/100/1000 Mbps 10 / 100 / 1000 Mbps (triple-speed)
MAC Interface RGMII / GMII / MII RGMII (Version 2.0 compliant, on-chip delay)
Supply Voltage (Core) 1.2 V —
Supply Voltage (Analog) 1.8 V —
Supply Voltage (I/O) 1.8 V / 2.5 V / 3.3 V —
Cable Diagnostics LinkMD TDR-based —
On-chip Termination Yes (1000Base-T) —
Température de fonctionnement -40C to +85C (industrial) 0C to +70C (commercial grade, CC suffix)
Boîtier 48-pin QFN (7x7 mm) 48-pin QFN (7x7 mm)
Type de montage Surface Mount Surface Mount
Niveau MSL 3 3
Statut RoHS Compliant Compliant
External Crystal 25 MHz reference —
LED Outputs 2 (link / activity programmable) —
Product Type — Ethernet Physical Layer Transceiver (PHY)
Standards — IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE)
Cable Interface — 4 differential pairs, CAT-5 UTP, 100-ohm differential
Management Interface — MDIO / MDC (IEEE 802.3 clause 22/45)
Supply Voltage (Analog/DVDD) — 3.3 V
Core Supply — 1.2 V (on-chip LDO controller + external MOSFET)
On-chip Features — Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction
Power Saving — Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis