KSZ9031RNXVB-VAO vs KSZ9031RNXUB-VAO Comparaison
Comparaison détaillée côte à côte de KSZ9031RNXVB-VAO par Microchip Technology et KSZ9031RNXUB-VAO par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ9031RNXVB-VAO - Gigabit Ethernet RGMII Transceiver AEC-Q100 | Microchip
KSZ9031RNXVB-VAO ✓ ActifMicrochip Technology
KSZ9031RNXUB-VAO - Gigabit Ethernet Transceiver, AEC-Q100, WQFN-48 | Microchip
KSZ9031RNXUB-VAO ✓ ActifComparaison des spécifications
| Paramètre | KSZ9031RNXVB-VAO | KSZ9031RNXUB-VAO |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,65 | $6,10 |
| Product Type | Ethernet Transceiver (PHY) | Ethernet Physical Layer Transceiver (PHY) |
| Débit de données | 10/100/1000 Mbps | 10/100/1000 Mbps (triple-speed) |
| Standards Compliance | IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T | — |
| MAC-Side Interface | RGMII (Version 2.0 compliant, on-chip delay) | — |
| Tension d'alimentation | 3.3 V (single supply; internal LDO for core) | [DATA_NEEDED: supply voltage] |
| MAC I/O Voltage Tolerance | 3.3 V / 2.5 V / 1.8 V | — |
| Boîtier | 48-pin WQFN (wettable-flank) | 48-pin WQFN (7x7 mm), lead-free |
| Température de fonctionnement | -40C to +105C (AEC-Q100 Grade 2) | -40C to +85C (automotive AEC-Q100 grade) |
| Automotive Qualification | AEC-Q100 qualified (VAO suffix) | — |
| Energy-Efficient Ethernet | IEEE 802.3az supported | — |
| Auto-Negotiation | Yes (with HP Auto-MDIX) | — |
| Wake-on-LAN | Supported | Yes, with custom-packet detection |
| Loopback Modes | Remote and local loopback | Remote and local loopback |
| Reference Clock | 25 MHz crystal or 125 MHz LVCMOS reference | — |
| Typical Active Power | 450 mW at 1 Gbps | — |
| Type de montage | Surface Mount | Surface Mount |
| Lead-Free / RoHS | Yes (lead-free) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Standards Supported | — | 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3) |
| MAC Interface | — | RGMII (Reduced Gigabit Media Independent Interface) |
| Cable Type | — | CAT-5 UTP (unshielded twisted pair) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Power Consumption (Active) | — | [DATA_NEEDED: typical active power] |
| Power Consumption (Energy-Detect) | — | ~75 mW when cable not attached |
| Reference Clock Output | — | 125 MHz |
| On-chip Termination Resistors | — | Yes (integrated MDI termination) |
| LED Outputs | — | Programmable (link/activity/speed) |
| Baseline Wander Correction | — | Integrated |
| Adaptive Equalization | — | Integrated |
| Statut RoHS | — | Compliant |
| Lead-Free | — | Yes |