KSZ9131RNXI-TR vs KSZ9131RNXC Comparaison
Comparaison détaillée côte à côte de KSZ9131RNXI-TR par Microchip Technology et KSZ9131RNXC par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ9131RNXI-TR - Gigabit Ethernet Transceiver | Microchip (Tape & Reel)
KSZ9131RNXI-TR ✓ ActifMicrochip Technology
KSZ9131RNXC - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 (Tape & Reel)
KSZ9131RNXC ✓ ActifComparaison des spécifications
| Paramètre | KSZ9131RNXI-TR | KSZ9131RNXC |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Ethernet Data Rate | 10/100/1000 Mbps | — |
| Duplex Support | Half-duplex and full-duplex | — |
| Ethernet Compliance | IEEE 802.3 compliant | — |
| Host Interface | GMII/MII/RGMII | — |
| I/O Voltage Tolerance | 3.3 V, 2.5 V, and 1.8 V | — |
| Primary Supply | 3.3 V | — |
| Reference Clock Output | 125 MHz | — |
| RGMII Clock Frequency | 125 MHz | — |
| RGMII Clock Period | 8 ns | — |
| Differential Pair Termination | On-chip resistors | — |
| Power Architecture | Single 3.3 V operation with one external FET | — |
| Auto-Negotiation | 10/100/1000 Mbps and half/full duplex | Yes (IEEE 802.3 Clause 28) |
| LED Functions | Programmable link, activity, and speed outputs | — |
| Low-Power Mode | Energy-detect power-down | — |
| Wake-on-LAN | Supported with custom-packet detection | Supported |
| Cable Diagnostic | LinkMD TDR-based diagnostic | — |
| Baseline Wander | Correction supported | — |
| Boîtier | 48-QFN (7 x 7 mm) | 48-pin QFN (7x7 mm) |
| Type de montage | Surface mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | Ethernet PHY Transceiver |
| Débit de données | — | 10/100/1000 Mbps (Triple-Speed) |
| Standards | — | IEEE 802.3, 802.3u, 802.3ab, 802.3az |
| MAC Interface | — | RGMII / GMII / MII |
| Media Interface | — | Twisted Pair (CAT-5/5e/6 UTP) |
| Tension d'alimentation | — | 3.3 V (single supply, internal 1.2 V LDO) |
| Typical Power Consumption | — | 600 mW (1000Base-T link) |
| Plage de température de fonctionnement | — | -40 C to +85 C (industrial) |
| Auto-MDI/MDIX | — | Yes (HP Auto-MDIX, all speeds) |
| Energy Efficient Ethernet | — | Yes (IEEE 802.3az) |
| Cable Diagnostics | — | LinkMD cable fault detection |
| Number of Transceivers | — | 1 |
| AEC-Q100 Qualification | — | Yes (automotive grade) |
| Statut RoHS | — | Compliant |