LAN8742-CZ vs KSZ8001LI Comparaison
Comparaison détaillée côte à côte de LAN8742-CZ par Microchip Technology et KSZ8001LI par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8001LI - 10/100 PHY Transceiver, MII/RMII/SMII | Microchip (Tape & Reel)
KSZ8001LI ✓ ActifComparaison des spécifications
| Paramètre | LAN8742-CZ | KSZ8001LI |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Ethernet Transceivers |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $4,30 |
| Product Type | 10/100 Fast Ethernet PHY transceiver | — |
| Maximum Data Rate | 100 Mbps | — |
| Supported Standards | IEEE 802.3 and IEEE 802.3u | — |
| Copper Modes | 10BASE-T and 100BASE-TX | — |
| Host Interface | RMII | MII, RMII, SMII (selectable via strap pins) |
| Driver/Receiver Configuration | 1/1 | — |
| I/O Voltage | 1.2 V and 3.3 V | — |
| Boîtier | 24-pin QFN, 4 x 4 mm | 48-LQFP (7 x 7 mm) |
| Auto-Negotiation | Supported | IEEE 802.3u Clause 28 |
| Auto-MDIX | HP Auto-MDIX supported | Yes (HP Auto-MDIX) |
| Cable Diagnostics | Supported | LinkMD TDR, up to 200 m, ±2 m accuracy |
| Energy Efficient Ethernet | IEEE 802.3az family support identified | — |
| Wake-On-LAN | Supported for the LAN8742 family | — |
| Operating Speed Modes | 10 Mbps and 100 Mbps | — |
| Duplex Operation | Full-duplex RMII support identified | — |
| Type de montage | Surface mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (RoHS3 per distributor data) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Fonction | — | 10/100BASE-TX/100BASE-FX Physical Layer Transceiver |
| Number of Drivers/Receivers | — | [DATA_NEEDED: explicit count] |
| Supply Voltage (Analog) | — | 3.3 V |
| Supply Voltage (Core) | — | 1.8 V (internal LDO from 3.3 V) |
| Supply Voltage (VDDIO) | — | 3.3 V or 2.5 V |
| Typical Power Consumption | — | 172 mW |
| Cable Reach (TX/Copper) | — | 130 m+ standard Cat-5 |
| Fiber Support | — | 100BASE-FX via external transceiver |
| Reference Clock | — | 25 MHz (50 MHz for RMII) |
| Packaging | — | Tape & Reel (-TR suffix) |
| Lead-Free | — | Yes |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |