LAN8742AI-CZ vs LAN8742-CZ-TR Comparaison

Comparaison détaillée côte à côte de LAN8742AI-CZ par Microchip Technology et LAN8742-CZ-TR par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
LAN8742AI-CZ LAN8742AI-CZ - 10/100 Ethernet PHY | Microchip Technology

LAN8742AI-CZ - 10/100 Ethernet PHY | Microchip Technology

LAN8742AI-CZ ✓ Actif
Microchip Technology
LAN8742-CZ-TR LAN8742-CZ-TR - 100Mbps Ethernet PHY with 24-QFN (Tape & Reel)

LAN8742-CZ-TR - 100Mbps Ethernet PHY with 24-QFN (Tape & Reel)

LAN8742-CZ-TR Obsolete

Comparaison des spécifications

Paramètre LAN8742AI-CZ LAN8742-CZ-TR
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Obsolete
Device Type 10/100 Fast Ethernet PHY transceiver —
Ethernet Speeds 10 Mb/s and 100 Mb/s —
Supported Physical Layers 10BASE-T and 100BASE-TX —
Host Interface RMII RMII
Supply Voltage Range 1.8 V to 3.3 V [DATA_NEEDED: supply voltage range]
Cable Length [DATA_NEEDED: supported cable length] —
Auto-Negotiation Supported Supported
Auto-Polarity Correction Supported —
HP Auto-MDIX Supported —
Wake-on-LAN Supported —
Cable Diagnostics Supported Supported
Low-Power Technology flexPWR —
Boîtier 24-SQFN, 4 mm x 4 mm 24-pin QFN, 4 x 4 mm
Type de montage Surface mount Surface mount
Number of Transceivers 1 —
IEEE Standards IEEE 802.3 and IEEE 802.3u —
Application Markets Consumer, embedded, and industrial —
Plage de température de fonctionnement [DATA_NEEDED: LAN8742AI-CZ operating temperature range] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Product Type — 10/100 Fast Ethernet PHY transceiver
Maximum Data Rate — 100 Mbps
Supported Standards — IEEE 802.3 and IEEE 802.3u
Copper Modes — 10BASE-T and 100BASE-TX
Driver/Receiver Configuration — 1/1
I/O Voltage — 1.2 V and 3.3 V
Auto-MDIX — HP Auto-MDIX supported
Energy Efficient Ethernet — IEEE 802.3az family support identified
Wake-On-LAN — Supported for the LAN8742 family
Operating Speed Modes — 10 Mbps and 100 Mbps
Duplex Operation — Full-duplex RMII support identified
Température de fonctionnement — [DATA_NEEDED: operating temperature range]
Power Consumption — [DATA_NEEDED: power consumption]
Lead-Free Status — [DATA_NEEDED: lead-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis