LAN91C111-NU vs LAN91C111-NS Comparaison

Comparaison détaillée côte à côte de LAN91C111-NU par Microchip Technology et LAN91C111-NS par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
LAN91C111-NU LAN91C111-NU - 10/100 Ethernet MAC/PHY | Microchip

LAN91C111-NU - 10/100 Ethernet MAC/PHY | Microchip

LAN91C111-NU ✓ Actif
Microchip Technology
LAN91C111-NS LAN91C111-NS - 10/100 Ethernet MAC+PHY | Microchip

LAN91C111-NS - 10/100 Ethernet MAC+PHY | Microchip

LAN91C111-NS ✓ Actif

Comparaison des spécifications

Paramètre LAN91C111-NU LAN91C111-NS
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type 10/100 non-PCI Ethernet single-chip MAC and PHY Mixed-signal analog/digital Ethernet controller
Supported Data Rates 10 Mbps and 100 Mbps —
Host Interface 8-bit, 16-bit, or 32-bit parallel bus —
Internal FIFO Memory 8 KB dynamically configurable TX/RX SRAM —
Network Standard 10/100 Base-T/TX —
Protocol Support CSMA/CD CSMA/CD
Tension d'alimentation 3.3 V [DATA_NEEDED: supply voltage]
Boîtier 128-lead TQFP, 14 mm x 14 mm 128-QFP (14 mm x 20 mm)
Type de montage Surface mount Surface mount
Architecture Mixed-signal analog and digital —
Automatic Negotiation Supported —
Transmit FIFO [DATA_NEEDED: Transmit FIFO size allocation] —
Receive FIFO [DATA_NEEDED: Receive FIFO size allocation] —
Plage de température de fonctionnement [DATA_NEEDED: Operating temperature range] —
Maximum Input Voltage [DATA_NEEDED: Maximum input voltage] —
Digital Input High Voltage [DATA_NEEDED: Digital input high threshold] —
Digital Input Low Voltage [DATA_NEEDED: Digital input low threshold] —
Analog Supply Current [DATA_NEEDED: Analog supply current] —
Digital Supply Current [DATA_NEEDED: Digital supply current] —
Ethernet Magnetics [DATA_NEEDED: Recommended integrated magnetics model] [DATA_NEEDED: magnetic component requirements]
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Ethernet Data Rate — 10 Mb/s or 100 Mb/s
Integrated Functions — 10/100 Ethernet MAC and PHY
Host Interface Width — 32-bit, 16-bit, or 8-bit parallel
Physical Network Standard — 10/100 Base-T/TX
Internal FIFO SRAM — 8 KB dynamically configurable TX/RX
AutoNegotiation — Supported
Nombre de broches — 128 pins
100BASE-TX Descrambling — IEEE 802.3 compliant
Line Encoding — 4B5B decoding and 5B word-boundary alignment
Température de fonctionnement — [DATA_NEEDED: operating temperature range]
Clock or Crystal Requirement — [DATA_NEEDED: clock and crystal requirements]
RoHS Compliance — unknown
REACH Compliance — unknown
AEC-Q100 Qualification — not_applicable

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis