LM224ADR vs LM224AN Comparaison
Comparaison détaillée côte à côte de LM224ADR par Texas Instruments et LM224AN par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM224ADR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM224ADR UnknownComparaison des spécifications
| Paramètre | LM224ADR | LM224AN |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | Quad general-purpose operational amplifier | — |
| Number of Amplifier Circuits | 4 circuits | — |
| Architecture | Four independent high-gain, frequency-compensated amplifiers | — |
| Gain-Bandwidth Product | 1.2 MHz | — |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 3 mV | 3 mV |
| Maximum Supply Voltage | 30 V | 30 V |
| Operating Supply Range | ±1.5 V to ±16 V | — |
| Supply Configuration | Single supply or split supply | Single or split supply |
| Plage de température de fonctionnement | -25°C to 85°C | -25°C to +85°C |
| Boîtier | 14-pin SOIC | 14-pin PDIP (N) |
| Type de montage | Surface-mount SOIC | Through-hole |
| Type de sortie | Standard general-purpose amplifier | — |
| Statut RoHS | unknown | unknown |
| REACH Status | unknown | unknown |
| AEC-Q100 Qualification | unknown | — |
| Number of Amplifiers | — | 4 channels |
| Amplifier Type | — | Single general-purpose operational amplifier |
| Unity-Gain Bandwidth | — | 1.2 MHz |
| Compensation | — | Internally compensated |
| Nombre de broches | — | 14 pins |
| Gain | — | [DATA_NEEDED: voltage gain] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Short-Circuit Output Current | — | [DATA_NEEDED: short-circuit output current] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |