LM224DG vs LM224DR Comparaison
Comparaison détaillée côte à côte de LM224DG par onsemi et LM224DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM224DR - Quad General-Purpose Op Amp | Texas Instruments (Tape & Reel)
LM224DR ✓ ActifComparaison des spécifications
| Paramètre | LM224DG | LM224DR |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Quad operational amplifier | Standard general-purpose operational amplifier |
| Number of Channels | 4 circuits | — |
| Amplifier Type | General-purpose operational amplifier | — |
| Gain-Bandwidth Product | 1 MHz | [DATA_NEEDED: gain-bandwidth product] |
| Supply Voltage Range | 3 V to 32 V | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | 5 mV | [DATA_NEEDED: input offset voltage] |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | — |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Boîtier | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | -25 C to +85 C | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | unknown |
| Number of Amplifier Circuits | — | 4 circuits |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Noise | — | [DATA_NEEDED: noise specifications] |