LM224DR vs LM224DG Comparaison
Comparaison détaillée côte à côte de LM224DR par Texas Instruments et LM224DG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM224DR - Quad General-Purpose Op Amp | Texas Instruments (Tape & Reel)
LM224DR ✓ ActifComparaison des spécifications
| Paramètre | LM224DR | LM224DG |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Standard general-purpose operational amplifier | Quad operational amplifier |
| Number of Amplifier Circuits | 4 circuits | — |
| Boîtier | 14-SOIC | 14-pin SOIC, 0.154 inch (3.90 mm) width |
| Type de montage | Surface mount | Surface mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 32 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 5 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | 1 MHz |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Output Current | [DATA_NEEDED: output current capability] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Noise | [DATA_NEEDED: noise specifications] | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Number of Channels | — | 4 circuits |
| Amplifier Type | — | General-purpose operational amplifier |
| Common-Mode Rejection Ratio | — | 70 dB minimum |
| Input Type | — | True differential inputs |
| Supply Configuration | — | Single supply or split supply |
| Compensation | — | Internally frequency compensated |
| Plage de température de fonctionnement | — | -25 C to +85 C |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |