LM258NG vs LM358AN Comparaison
Comparaison détaillée côte à côte de LM258NG par onsemi et LM358AN par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM358AN - Dual 1MHz Op Amp, 3-36V Single Supply | Texas Instruments
LM358AN ✓ ActifComparaison des spécifications
| Paramètre | LM258NG | LM358AN |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Amplifier Type | General Purpose | General-purpose, internally frequency-compensated, single-supply operational amplifier |
| Number of Circuits | 2 circuits | — |
| Gain-Bandwidth Product | 1 MHz | 1.0 MHz |
| Slew Rate | 0.6 V/µs | 0.3 V/us |
| Supply Voltage Range | 3 V to 32 V | — |
| Supply Configuration | Single supply or split supply | — |
| Common-Mode Input Voltage Range | Extends to ground/VEE | — |
| Boîtier | 8-PDIP, 0.300 inch (7.62 mm) pitch | PDIP-8, 8-pin plastic dual in-line (through-hole) |
| Nombre de broches | 8 pins | — |
| Type de montage | Through-hole | Through-hole |
| Packaging | Tube | — |
| Bias Current | [DATA_NEEDED: bias current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV typical, 3 mV maximum |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Output Current | [DATA_NEEDED: output current] | 40 mA typical source, 20 mA typical sink |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 C to +70 C |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Number of Amplifiers | — | 2 (independent channels) |
| Supply Voltage Range (single supply) | — | 3 V to 36 V |
| Maximum Total Supply Voltage | — | 36 V |
| Input Common-Mode Voltage Range | — | 0 V to (V+ minus 1.5 V) |
| Open-Loop Gain | — | 100 dB minimum |
| Input Bias Current | — | 20 nA typical |
| Input Offset Current | — | 2 nA typical |
| Output Voltage Swing | — | Approximately 20 mV from each rail into 2 kOhm load |
| Lead-Free Status | — | Lead-free (A suffix), RoHS compliant |
| Number of Outputs per IC | — | 2 |
| Current Supply (Typ) | — | [DATA_NEEDED: total supply current typical] |