LM2902KAVQDRG4 vs LM2902DR Comparaison
Comparaison détaillée côte à côte de LM2902KAVQDRG4 par Texas Instruments et LM2902DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2902DR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902DR ✓ ActifComparaison des spécifications
| Paramètre | LM2902KAVQDRG4 | LM2902DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Amplifier Channels | 4 channels | 4 |
| Supply Voltage Range | 3 V to 30 V | — |
| Gain-Bandwidth Product | 1.2 MHz | — |
| Input Offset Voltage | 2 mV | — |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Improved ESD Protection | 2 kV | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Boîtier | 14-SOIC | 14-SOIC |
| Nombre de broches | 14 pins | — |
| Type de montage | Surface mount | Surface mount |
| Amplifier Type | General-purpose operational amplifier | — |
| Number of Independent Channels | 4 independent channels | — |
| Compensation | Internally compensated | — |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Product Type | — | Quad operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Typical Gain-Bandwidth Product | — | 1.2 MHz |
| Typical Input Offset Voltage | — | 2 mV |
| Type de sortie | — | Push-pull |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Current | — | [DATA_NEEDED: output current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Supplier Description | — | Standard general-purpose amplifier |