LM2902KVQPWRQ1 vs LM2902PWRG3 Comparaison

Comparaison détaillée côte à côte de LM2902KVQPWRQ1 par Texas Instruments et LM2902PWRG3 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2902KVQPWRQ1 LM2902KVQPWRQ1 - 26V Quad 1.2MHz Automotive Op Amp | TI

LM2902KVQPWRQ1 - 26V Quad 1.2MHz Automotive Op Amp | TI

LM2902KVQPWRQ1 ✓ Actif
Texas Instruments
LM2902PWRG3 LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 ✓ Actif

Comparaison des spécifications

Paramètre LM2902KVQPWRQ1 LM2902PWRG3
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Quad general-purpose operational amplifier —
Number of Amplifier Circuits 4 circuits —
Tension d'alimentation Up to 26 V —
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV 2 mV
Automotive Qualification AEC-Q100 qualified —
Boîtier 14-pin TSSOP 14-pin TSSOP (PW), 4.40 mm width
Type de montage Surface mount Surface mount
Operating Supply Mode Single supply or split supply —
ESD Protection Less than 500 V per MIL-STD-883, Method 3015 —
Machine-Model ESD 200 V, 200 pF —
Configuration Control Customer-specific configuration control can be supported —
Major-Change Approval Supported —
Statut du cycle de vie Active product family —
Statut RoHS [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Number of Amplifiers — 4 amplifiers
Amplifier Type — General-purpose
Maximum Supply Voltage — 26 V
Slew Rate — 0.5 V/µs
Supply Current Drain — 0.8 mA typical
Supply Configuration — Single supply or split supply
Packaging — Tape and reel (TR)
Lead Pitch — 0.65 mm
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Open-Loop Gain — [DATA_NEEDED: open-loop gain]
Unity-Gain Bandwidth — [DATA_NEEDED: unity-gain bandwidth]
AEC-Q100 Qualification — not_applicable

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis