LM2902PWRG3 vs LM2902KVQPWRQ1 Comparaison

Comparaison détaillée côte à côte de LM2902PWRG3 par Texas Instruments et LM2902KVQPWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2902PWRG3 LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 ✓ Actif
Texas Instruments
LM2902KVQPWRQ1 LM2902KVQPWRQ1 - 26V Quad 1.2MHz Automotive Op Amp | TI

LM2902KVQPWRQ1 - 26V Quad 1.2MHz Automotive Op Amp | TI

LM2902KVQPWRQ1 ✓ Actif

Comparaison des spécifications

Paramètre LM2902PWRG3 LM2902KVQPWRQ1
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Number of Amplifiers 4 amplifiers —
Amplifier Type General-purpose —
Maximum Supply Voltage 26 V —
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV 2 mV
Slew Rate 0.5 V/µs —
Supply Current Drain 0.8 mA typical —
Supply Configuration Single supply or split supply —
Boîtier 14-pin TSSOP (PW), 4.40 mm width 14-pin TSSOP
Packaging Tape and reel (TR) —
Type de montage Surface mount Surface mount
Lead Pitch 0.65 mm —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Unity-Gain Bandwidth [DATA_NEEDED: unity-gain bandwidth] —
Statut RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Product Type — Quad general-purpose operational amplifier
Number of Amplifier Circuits — 4 circuits
Tension d'alimentation — Up to 26 V
Automotive Qualification — AEC-Q100 qualified
Operating Supply Mode — Single supply or split supply
ESD Protection — Less than 500 V per MIL-STD-883, Method 3015
Machine-Model ESD — 200 V, 200 pF
Configuration Control — Customer-specific configuration control can be supported
Major-Change Approval — Supported
Statut du cycle de vie — Active product family
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis