LM2902PWRG3 vs LM2902PWR Comparaison

Comparaison détaillée côte à côte de LM2902PWRG3 par Texas Instruments et LM2902PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2902PWRG3 LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 ✓ Actif
Texas Instruments
LM2902PWR LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments

LM2902PWR - Quad 36V 1.2MHz Op Amp | Texas Instruments

LM2902PWR ✓ Actif

Comparaison des spécifications

Paramètre LM2902PWRG3 LM2902PWR
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Number of Amplifiers 4 amplifiers —
Amplifier Type General-purpose —
Maximum Supply Voltage 26 V 36 V
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Input Offset Voltage 2 mV 2 mV maximum at 25°C for BA versions, LM2902A, and LM124A
Slew Rate 0.5 V/µs [DATA_NEEDED: slew rate]
Supply Current Drain 0.8 mA typical —
Supply Configuration Single supply or split supply —
Boîtier 14-pin TSSOP (PW), 4.40 mm width —
Packaging Tape and reel (TR) —
Type de montage Surface mount Surface mount
Lead Pitch 0.65 mm —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Unity-Gain Bandwidth [DATA_NEEDED: unity-gain bandwidth] —
Statut RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable [DATA_NEEDED: AEC-Q100 qualification]
Amplifier Count — 4 circuits
Product Type — General-purpose operational amplifier
Nominal Supply Voltage — 26 V
Supply Voltage Range — 3 V to 36 V for B and BA versions
Common-Mode Input Range — Extends to ground
Differential Input Voltage Capability — High differential input voltage capability
Internal Compensation — Frequency compensated
Package Type — 14-TSSOP
Channel Independence — 4 independent amplifiers
Lead-Free Status — [DATA_NEEDED: lead-free status]
Output Current — [DATA_NEEDED: output current]
Input Bias Current — [DATA_NEEDED: input bias current]
Packaging Quantity — [DATA_NEEDED: standard packaging quantity]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis