LM2902PWRG3 vs LM2902WYPT Comparaison

Comparaison détaillée côte à côte de LM2902PWRG3 par Texas Instruments et LM2902WYPT par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2902PWRG3 LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 - 26V Quad 1.2MHz Op Amp | Texas Instruments

LM2902PWRG3 ✓ Actif
STMicroelectronics
LM2902WYPT LM2902WYPT - 1.3MHz Quad Op Amp | STMicroelectronics

LM2902WYPT - 1.3MHz Quad Op Amp | STMicroelectronics

LM2902WYPT ✓ Actif

Comparaison des spécifications

Paramètre LM2902PWRG3 LM2902WYPT
Marque Texas Instruments STMicroelectronics
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Number of Amplifiers 4 amplifiers —
Amplifier Type General-purpose —
Maximum Supply Voltage 26 V —
Gain-Bandwidth Product 1.2 MHz 1.3 MHz
Input Offset Voltage 2 mV [DATA_NEEDED: input offset voltage]
Slew Rate 0.5 V/µs [DATA_NEEDED: slew rate]
Supply Current Drain 0.8 mA typical —
Supply Configuration Single supply or split supply —
Boîtier 14-pin TSSOP (PW), 4.40 mm width 14-TSSOP
Packaging Tape and reel (TR) —
Type de montage Surface mount Surface mount
Lead Pitch 0.65 mm —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] Includes the negative supply rail
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Unity-Gain Bandwidth [DATA_NEEDED: unity-gain bandwidth] —
Statut RoHS unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Amplifier Count — 4 amplifiers
Product Type — Low-power quad operational amplifier
Large-Signal Voltage Gain — 100 dB
Supply Current per Amplifier — 375 uA
Input Bias Current — 20 nA
Input Offset Current — 2 nA
ESD Protection — 800 V
Single-Supply Operating Range — Up to 30 V
Dual-Supply Operating Range — Up to ±15 V
Frequency Compensation — Internal
Output Stage — Push-pull
Package Width — 4.40 mm
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis