LM2903AVQPWR vs LM2903VQPWRQ1 Comparaison
Comparaison détaillée côte à côte de LM2903AVQPWR par Texas Instruments et LM2903VQPWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903AVQPWR - Dual Differential Comparator | Texas Instruments
LM2903AVQPWR ✓ ActifTexas Instruments
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1 ✓ ActifComparaison des spécifications
| Paramètre | LM2903AVQPWR | LM2903VQPWRQ1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential voltage comparator | Dual general-purpose differential comparator |
| Number of Channels | 2 | 2 channels |
| Supply Configuration | Single supply or dual supplies | Single supply or dual supplies |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Maximum Tested Supply Voltage | 30 V for V-suffix devices; 32 V for non-V devices | — |
| Supply Current Drain | 0.4 mA typical per comparator | 0.4 mA typical per comparator |
| Type de sortie | Open-collector | Open-collector |
| Input Configuration | Differential input | — |
| Plage de température de fonctionnement | -40°C to 125°C | [DATA_NEEDED: operating temperature range by grade] |
| Boîtier | 8-pin TSSOP (PW) | 8-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Lead Temperature | [DATA_NEEDED: lead temperature] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Response Time | [DATA_NEEDED: response time] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | Rail-to-rail |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Dual-Supply Total Voltage Range | — | 2 V to 36 V |
| Minimum VCC Margin | — | At least 1.5 V above the lower supply |
| Automotive Qualification | — | AEC-Q100 Grade 0 and Grade 1 |
| ESD Rating | — | 2 kV |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance statement] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance statement] |
| Shipping Format | — | Tape and reel |