LM2903D vs LM2903IMX Comparaison
Comparaison détaillée côte à côte de LM2903D par Texas Instruments et LM2903IMX par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2903D | LM2903IMX |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Type de sortie | Open-collector | Open-collector |
| Response Time | 300 ns | — |
| Boîtier | 8-pin SOIC | 8-SOIC, 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Courant de repos | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Comparison Channels | — | 2 channels |
| Single-Supply Operating Voltage | — | 2 V to 36 V |
| Dual-Supply Operating Voltage | — | ±1 V to ±18 V |
| Typical Response Time | — | 1.5 µs |
| Typical Supply Current | — | 800 µA |
| Input Common-Mode Range | — | Includes ground |
| Number of Inputs | — | 4 differential inputs |
| Nombre de sorties | — | 2 outputs |
| Packaging | — | Tape and reel |
| Logic Compatibility | — | Compatible with TTL and CMOS logic |
| Single-Supply Comparison Near Ground | — | Supported |