LM2903D vs LM393D Comparaison
Comparaison détaillée côte à côte de LM2903D par Texas Instruments et LM393D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM393D - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments (Tape & Reel)
LM393D ✓ ActifComparaison des spécifications
| Paramètre | LM2903D | LM393D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | — |
| Number of Channels | 2 channels | 2 |
| Supply Voltage Range | 2 V to 36 V | — |
| Type de sortie | Open-collector | Open-Collector |
| Response Time | 300 ns | 1.3 µs (typical) |
| Boîtier | 8-pin SOIC | SOIC-8 (D), 3.90 mm body width |
| Type de montage | Surface mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +125 °C | 0 °C to +70 °C |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Courant de repos | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Manufacturer | — | Texas Instruments |
| Part Number | — | LM393D |
| Fonction | — | Dual Differential Comparator |
| Supply Voltage (Single) | — | 2 V to 36 V |
| Supply Voltage (Dual) | — | ±1 V to ±18 V |
| Input Offset Voltage (typical) | — | 1 mV |
| Input Bias Current (typical) | — | 25 nA |
| Supply Current per Comparator | — | 0.4 mA (typical) |
| Common-Mode Input Range | — | 0 V to VCC − 1.5 V |
| ESD Rating (HBM, B-version) | — | 2 kV |
| Lead-Free | — | Yes |