LM2903NG vs LM293P Comparaison
Comparaison détaillée côte à côte de LM2903NG par onsemi et LM293P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2903NG | LM293P |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Comparators | 2 (dual independent) | — |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage | 1 mV typ (low offset) | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 250 nA | [DATA_NEEDED: input bias current] |
| Response Time (typ) | 1.3 us to 1.5 us | — |
| Type de sortie | Open-Collector | Open-collector |
| Input Common-Mode Range | Extends to ground (negative rail) with single supply | — |
| Plage de température de fonctionnement | -40C to +105C | [DATA_NEEDED: operating temperature range] |
| Boîtier | PDIP-8 (8-pin through-hole) | 8-pin PDIP |
| Type de montage | Through Hole | Through-hole |
| Family | LM393 / LM2903 series | — |
| Supply Current (per comparator, typ) | [DATA_NEEDED: supply current] | — |
| Output Saturation Voltage | [DATA_NEEDED: saturation voltage] | [DATA_NEEDED: output saturation voltage] |
| Differential Input Voltage Range | [DATA_NEEDED: differential input range] | [DATA_NEEDED: differential input voltage range] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: CMRR] | — |
| ESD Rating | [DATA_NEEDED: ESD rating] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Propagation Delay | — | 300 ns |
| Input Common-Mode Capability | — | Rail-to-rail |
| Temperature Grade | — | Industrial grade |
| Comparator Classification | — | Standard general-purpose comparator |
| Nombre de broches | — | 8 pins |
| Channel Independence | — | 2 independent channels |
| Logic Output Compatibility | — | TTL, MOS, and CMOS compatible |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |