LM2903P vs LM2903NG Comparaison
Comparaison détaillée côte à côte de LM2903P par Texas Instruments et LM2903NG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903P - Dual Differential Comparator, 30 V, PDIP-8 | Texas Instruments
LM2903P ✓ ActifComparaison des spécifications
| Paramètre | LM2903P | LM2903NG |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | — |
| Number of Comparators | 2 | 2 (dual independent) |
| Type de sortie | Open-collector | Open-Collector |
| Output Style | Rail-to-rail | — |
| Supply Voltage Range | 2 V minimum | — |
| Maximum Supply Voltage | Up to 38 V for LM2903B family | — |
| Input Offset Voltage | 0.37 mV for LM2903B family | 1 mV typ (low offset) |
| Input Bias Current | 3.5 nA for LM2903B family | 250 nA |
| Courant d'alimentation | 200 uA per comparator for LM2903B family | — |
| Response Time | 1 us for LM2903B family | — |
| ESD Rating | 2 kV HBM for LM2903B family | [DATA_NEEDED: ESD rating] |
| Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Boîtier | 8-pin PDIP | PDIP-8 (8-pin through-hole) |
| Type de montage | Through-hole | Through Hole |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Response Time (typ) | — | 1.3 us to 1.5 us |
| Input Common-Mode Range | — | Extends to ground (negative rail) with single supply |
| Plage de température de fonctionnement | — | -40C to +105C |
| Family | — | LM393 / LM2903 series |
| Supply Current (per comparator, typ) | — | [DATA_NEEDED: supply current] |
| Output Saturation Voltage | — | [DATA_NEEDED: saturation voltage] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: CMRR] |